- (2 pages)
- 1
- 2
| Title | Category   |
|
|---|---|---|
| add to favorites | How to place the specifications of the super thin 115 cutting disc ? | Cars |
| super thin 115 cutting disc should be properly placed for use in order to be used better. And 4 1/2 super thin cutting disc same, So how do we usually place them when they are placed? It should be placed separately according to specifications. The storage area should be marked. In order to avoid confusion and errors. Place location and setting method. Larger diameter and thicker grinding wheels are placed upright or slightly inclined. Thinner and smaller grinding wheels should be placed flat. However, the vertical height should not exceed 600 mm. The height of the rubber or resin sheet grinding wheel should not exceed 20 mm. And placed a flat iron plate on top of each other. It can prevent the grinding wheel from being deformed or broken. Small diameter grinding wheels can be stringed together for storage. Shaped cups and butterfly-shaped shaped grinding wheels should be placed with the bottom facing one next, but not too high. Both rubber and resin are aging. In the transportation and storage of long-distance abrasive tools, the cutting sheet manufacturers must pay attention to the following matters in order to avoid damage to the abrasive tools during transportation and storage. Use wooden boxes and wicker baskets for long-distance transportation and properly package them. Separate the abrasives with soft materials such as straw or sentence. To prevent collision and stacking during handling, stacking should be stable and ceramic abrasives should not be placed in wet or frozen places. Rubber grinding tools are not easy and come into contact with oil. Resin abrasives, not in contact with alkali. Otherwise it will reduce the strength of the abrasive. That is the grinding ability. Store in a dry place at room temperature no less than 5 °C. | ||
| add to favorites | 115 * 1 * 22 cutting disc for cold pressing process need to pay attention to? | Cars |
| With the development of technology and the improvement of production technology, the cutting blades that used to rely mainly on imports have been greatly developed, especially the 115*1*22 cutting disc and the T41 green cutting disc size industry. With the maturity of technology and the improvement of technology, The production of cutting blades is no longer a problem. Today we will lead us to know the cold pressing process in the production process of the cutting piece. Most of the original production is ceramic grinding wheels. The advantages of ceramic bond grinding wheels are their natural porosity and chemical stability, which makes them suitable for dry and wet grinding, especially in the case of water-based and oil-based grinding fluids. However, the ceramic grinding wheel is less elastic and requires a high sintering temperature, which limits its development. The phenolic resin bond grinding wheel has the advantages of good elasticity and low sensitivity to shock, impact and side pressure. Its high stability makes it suitable for higher speeds and improved grinding performance, making it particularly suitable for grinding wheels and Huaji cutting wheels. Its good elasticity makes it suitable for ultra-precise grinding and surface finishing. | ||
| add to favorites | T41 green cutting disc cutting precautions? | Cars |
| When the cutting disc is in use, the grinding wheel works mainly for grinding. The grinding wheel is divided into different types according to different classification methods. The resin grinding wheel is one of them. The resin grinding wheel is the T41 green cutting disc size. A grinding wheel machined from a binder. The grinding wheel of different cutting pieces is also used differently, such as 115 golden star cutting disc, and the grinding wheel should also be operated according to the corresponding operation method to ensure the working quality and efficiency of the grinding wheel. Let us introduce the T41 green cutting disk resin grinding wheel. Please pay attention to the problems in the process of use, let's take a look at it! 1. Before using the resin grinding wheel, be sure to check the product for cracks, products and dumb sounds. If it is, it cannot be used. 2. The speed of the grinding wheel must not exceed the specified safe working line speed. 3. Do not use the end face grinding wheel exclusively. Please do not work with the end face of the grinding wheel. 4. When the grinding wheel is working on the workpiece, please do not push the workpiece with the lever to increase the pressure on the grinding wheel. 5. Special dressing tools should be used for dressing the grinding wheel. Operators must wear protective goggles when trimming. 6. In the grinding process, the coolant should be used correctly; if the coolant is not used, there must be a dustproof device. 7. Each piece of resin grinding wheel is marked with the highest use and line speed. Before installing the machine, you must first confirm the speed of the machine. Do not exceed the speed marked on the grinding wheel to ensure that the machine has perfect protection device, the center hole of the grinding wheel and the center axis of the grinding wheel. Must match, otherwise it cannot be used. | ||
| add to favorites | What are the characteristics of the development of the T41 green cutting disc industry? | Cars |
| 2016 is a year in which the development of cutting discs is not very clear. The development of the cutting disc industry under the new economic normal is particularly slow. Today, with the current development of the T41 green cutting disc size and 115 golden star cutting disc industry, what are the characteristics of the development of the cutting disc industry? 1. Increased production costs and reduced profits As the standard of living continues to increase, raw materials also grow. For example, the labor force that our country once proud of has decreased at a rate of 13.6% per year between 2004 and 2011, and stopped growing in 2015, that is, the demographic dividend has ceased to exist this year. 2. The export is difficult and the economy is affected. Financial openness is a measure vigorously pursued by governments in the 21st century. In this environment, the transnational flow of international capital has become very convenient, but at the same time it has brought enormous threats to global economic security. 3. Weak innovation ability and slow brand building We often hang on our lips, "Innovation is the source of power for enterprise development," but how much is the company truly innovative? In the market, after 80 and 90, they gradually became the main force of market consumption. They pursued the difference of products, and these conservative old products circulating in the market could not meet their needs. | ||
| add to favorites | What are the tips for polishing the T41 green cutting disc? | Cars |
| The T41 green cutting disc size is polished after a period of use to make it work more efficiently. Then, when polishing, which tools are used for polishing depends on how much you need to polish. If it is polished to a mirror surface, it needs to be more than 2 kilograms of water sandpaper + polishing machine. It is indispensable. If it is just a simple polishing, use up to 1200~1000 mesh ordinary sandpaper or water sandpaper on the plane. Polish it. Simple polishing with sandpaper is based on the number of meshes from the small sandpaper to the large mesh sandpaper. In general, if the metal surface is already flat, you can start grinding from 600. If it is not very flat, start with 400 or 200. Sandpaper has dry sandpaper (general sandpaper) and wet sandpaper (commonly known as water sandpaper). Usually it is more than 12,000. It is wet sandpaper. It needs to be matched with abrasive. There are two kinds between 600 and 1000. Dry sandpaper. The water sandpaper is water-grinded, and the effect is not effective without the abrasive paste. If the hand-grinding with only water is generally grinded to 1200-1500, it is enough. Grinding method is 90 degree staggered grinding. For example, 600 mesh sandpaper is left and right grinding, then 800 mesh is to be grounded up and down. If it is similar to grinding, it will cause too many scratches. The platform is best to choose glass as the grinding platform, because the flattest and hardest, if there is no glass, the leveling can also be, but the effect will be discounted. | ||
| add to favorites | What are the basic knowledge of 4 1/2 super thin cutting disc？ | Cars |
| I don't know if you have used 4 1/2 super thin cutting disc. I don't know if you understand 4 1/2 super thin cutting disc. I will introduce some relevant knowledge to you today and hope to help you better. Use and understand the cutting piece. Usually, the carcass material and particles of the dicing sheet are sintered to form a sintered body of a certain shape, and this sintered body is generally referred to as a cutter head. Therefore, the slice is composed of a substrate and a cutter head. There are many types of cutter heads. The carcass material shall have a certain hardness, wear resistance and durability of 4ii. Carcass materials generally have four base copper, cobalt, iron and tungsten carbide groups. In the meantime, cobalt-based carcass materials work best, but they are expensive and cannot be used on a large scale. Iron-based carcass materials are the most used in practice. The added components in the carcass are mainly composed of a skeleton component, a binder component, an affinity component, and a strengthening component. Different base materials are used, and the added ingredients are also different. In order to enhance the hardness and wear resistance of the carcass, a high melting point metal such as tungsten, tungsten carbide or the like is often added to the composition, and a low melting point metal such as a copper-based alloy such as cobalt, nickel or manganese is used as the cutting piece. Bonding material. The cutting blade slicing head is produced as follows. (1) Weighing The metal powder and diamond are weighed according to the formula according to the formula. (2) Mixing metal powder and artificial diamond, the general mixing time is 8h. (3) The mold is loaded into the graphite mold by mixing the mixed materials. When filling, first fill the metal powder without diamond spoon, compact it and then put it into the mixed diamond and binder powder. (4) Constraining the mold in a sintering furnace for pressurization and heating for sintering and maintenance (5) Grinding After the hot-formed cutter head is dropped from the grinding tool, the corners are sharpened to make the edges flat and easy to weld. | ||
| add to favorites | T41 green cutting disc slicing work performance indicators? | Cars |
| T41 green cutting disc size slicing objects are stone, such as marble, granite, etc., the cutting process is largely affected by mineral composition and structural characteristics. The first thing that cuts the cutting disc is the diamond. Just like the free sample cutting disc, the diamond is strong and has sharp sharp edges. Under the effect of high-speed rotation of the saw blade and lateral feeding force, the diamond is engraved. And break the rock and then finish the cut. In fact, the diamond slice is not cut but is machined by grinding. When performing the grinding process in the stone processing enterprise, the front and sides of the sawtooth will be distinguished by the individual diamonds. During the operation, each diamond is supported by the dovetail structure, which is strengthened and immediately after the diamond crystal. The support force of the glue. An outstanding diamond in this way will cut into the material and grind it into a fine powder. In the process of cutting, the outstanding diamond may break or break. Here, we should introduce the different cutting objects. The hardness and structure are not necessary. The speed of diamond damage is different. This is the diamond head we often say. Wear and tear. After this wear, the new diamond is gradually revealed and the grinding operation is carried out. Following the development of the stone profession, the sharpness and cutting power of diamond chips have also received much attention. The roughness of the diamond cutting power and the length of the service life are closely related to the formulation of the cutter head. The cutter head depends mainly on the parameters of the selected diamond, the carcass parameters and the like. The function of diamond chips is primarily expressed in sharpness and wear resistance. In the sawing process, the sharpness is expressed as the unevenness of the cutting power, and the wear resistance is expressed as the length of life of the saw blade. Power bumps and length of life are two important indicators. | ||
| add to favorites | How to use the T41 green cutting disc for stainless steel mirror cutting? | Cars |
| T41 green cutting disc size is a kind of cutting piece with a large amount of use in the cutting piece and a wide use surface. It can be rotated at high speed during use, and can be used for roughening the outer circle, inner circle, plane and various profiles of metal or non-metal workpieces. Grinding and roughing, fine cutting, and slotting and cutting. When mirroring stainless steel, cutting is a must-have tool. The process of using stainless steel mirrors for cutting surfaces is as follows: Rough grinding: The thinning work is carried out by the iron plate. If the flatness of the product is poor, it is necessary to grind a certain size to reach a plane. Therefore, there are several points to be considered in the selection of the synthetic iron plate, which is the reason why the iron plate has higher hardness and better cutting force. Rough throw: The process of rough throwing and leading. In this process, the pressure is first, the weight is too light, and the trace of the iron plate cannot be thrown at all. The specific weight depends on the hardness of the workpiece. Then this product has a lead angle, then you need to put a soft skin under the white cloth, which helps the lead angle, but the soft skin can not be too soft. Then the choice of liquid, this process is also the most important, polishing this process, then the steps to success from this product are also accelerated. Fine cutting: Although the requirements of fine polishing are not too difficult, they are not easy to ignore. This process is easy to scratch the product, so the quality of the polishing skin and the polishing liquid must be guaranteed; then the sanitary conditions require the employees to do the maintenance work. Which is good for cutting? Look for Aurora Abrasives. Which is good for cutting chip manufacturers? Consult aurora abrasives, various types of cutting blades, aurora abrasives, high quality and low price, welcome to inquire and purchase! | ||
| add to favorites | A brief introduction to 115 gold star cutting disc? | Cars |
| 115 gold star cutting disc are our new generation of cutting disc technology, which has brought great convenience and use to the users. But for some users who have not touched the cutting blade, many users don't know much about it. Today, Aurora Abrasives Co., Ltd. will give you a brief introduction and hope to help more users. The cutting blades are mainly electro-grinding and pneumatic tools for the cutting and opening of workpieces: wood, plastic, aluminum and copper metal, steel. And other various materials for cutting, etc., for some materials, the cutting piece is a good cutting tool. Let's take a detailed description of the 115 Venus cutting pieces: 1. Outer diameter: 22mm, 25mm, 29mm, 38mm, 52mm, 71mm, 75mm, 100m, 125mm, 150mm, 180-405mm 2, inner diameter,: 1.5-10mm, 3/8", 1/2", 3/4", 7/8", 1", 1 1/4" 3, thickness: 0.13-3.0mm Special size can be customized according to customer needs. characteristic: 1, wear-resistant: excellent wear resistance, reducing costs. 2, special: no odor of rubber grinding wheel, to avoid air pollution. 3, sharp: high work efficiency, reduce working hours. use: 1. Grinding machine is used to cut tungsten carbide, carbide, gemstone and PCB. 2, Western knife, enamel processing. 3, resistance milling groove. 4. Cutting and milling of general and special steel products (S45C, SK, SKS, SKH, etc.). 5, tooth tooth mold. Power tools or pneumatic tools. 7, pen tube, cosmetic lipstick tube cutting. 8, golf club head carving. Features: 1. Strong intensity and high safety. 2, good wear resistance (the general market grinding wheel hardness is HRA50-70, this product can reach HRA100 or more). 3. The grinding wheel is straight, so the material to be cut is straight, no material is wasted and the material to be cut can be dispensed with. 4, the product thin can reach 0.13mm, it can replace the general grinding machine with porcelain wheel milling groove. (Most precision milling grooves must be trimmed with diamonds. This product is not required.) 5. The company can manufacture exclusive grinding wheel for customers, which meets the professional needs of customers and achieves its high economic effects. The above is the characteristics of the Venus cutting piece introduced by Aurora Abrasive Molding Co., Ltd., and I hope to help you better understand and choose the right cutting piece. | ||