[Noah's Classifieds] - Advertisements of user adtozhou

Please register or log in.

Advertisements of user adtozhou
	Title	Category
add to favorites	Some important factors to effect the life time of printer	Hardware
From the cartridge body to points, there are two major integrated and drum powder separation. Integral and drum separation of the difference is that split-type photo conductor drum can be separated, but not integrated. When the toner is exhausted, the user only needs to change the corresponding toner cartridge, so the cost of using the integrated cartridge is higher, and the toner cartridge with separate cartridge has higher cost performance. In general cartridge is made of aluminum tubes and photosensitive materials, in addition to the use of drum powder separation technology, but also used a long life cartridge technology. Cartridges with long-life technology are composed of five layers of material, while the average cartridge has only the first three layers. The first layer is generally aluminum, the second layer is the insulating layer, the third is the photosensitive layer, the fourth layer is the first protective layer, the fifth layer is the second protective layer. Behind the fourth and fifth layers are used to protect the photosensitive layer, the two layers are long-life cartridge unique protective layer technology to protect the entire cartridge long life. The use of long-life toner cf217a protects the mechanical part of the laser printer, allowing the device to last longer, doubling the life of the laser printer. Try to use the original supplies, although the cost will be high, but you can avoid damage to the printer due to supplies problems. For example, because of ink and plug the nozzle, but the replacement of a print head is also relatively high cost, while filling the toner may appear to burn the printer chip.Each printer has a monthly print load, try not to exceed this amount when using, if a large print volume, can be divided into multiple times to complete each print can be paused for a few minutes and then the next print, because the overload print Will speed up the loss of printer components. Regular cleaning and maintenance of the printer can effectively extend the life of the printer. For laser printers, toner protectors, paper feed rollers, air vents and other components can be regularly cleaned, and the printer can also be cleaned by purchasing a special laser printer "cleaning paper." This article come from:http://v4toner.skyrock.com/3306154046-Some-important-factors-to-effect-the-life-time-of-printer.html
add to favorites	V4ink offer some suggestions of cartridge maintenance	Hardware - Memory chips
In order to ensure the normal operation of your purchased CF500X toner, we provide the following suggestions for your reference: Laser printers, like computers, are best placed in an air-conditioned environment for optimal printing results and reduced failure rates. Put the toner cartridge in the appropriate laser printer in the correct direction. Do not open the drum lens hood and touch the drum surface. Do not rotate the drum. Laser HP CF500A for the silicone light conductor, there is the problem of fatigue, therefore, the continuous working time can not be too long, if the output is large, after a period of time to stop for a while and then continue to output. Some users use two powder boxes to work alternately, but also a way. As for the cartridge maintenance, generally can be carried out as follows: (1) Carefully remove the cartridge assembly, wipe the surface with absorbent cotton wipe clean, but not hard to prevent scratches the surface of the cartridge. (2) Wipe the surface of the drum with a special cleaning agent that has been dipped in the cotton cloth. Wiping should take a spiral circle method, polish clean with cotton wool immediately after wiping clean. (3) with a piece of talc loaded gauze on the drum surface gently pat a layer of talcum powder, you can put back to use. (4) When changing the toner, pay attention to clean the waste toner in the waste toner collection bin to avoid affecting the output effect. Because too much waste toner accumulation, first of all there will be "leakage" phenomenon, that is, the output of the draft (usually vertical) irregular black spots, black, if not excluded and continue to use, after a period of time in Serious bottom ash (with longitudinal scratches) appears at the "leaky" area.The reason for this failure is that the waste toner accumulates too much at first, so that the waste toner produced again can not enter the waste toner production warehouse, and the waste toner in the waste toner warehouse will continuously "squeeze out" to produce the phenomenon of "powder leakage" This article come from:http://v4toner.pixnet.net/blog/post/146913486
add to favorites	What is the type of toner cartridges?	Hardware
Toner cartridges are integral (or integrated) and separate two. The integrated cartridge is designed to contain [url=http://v4toner.mee.nu]toner cartridges[/url] and drums on the same device. When the toner is exhausted or the drum is damaged, the entire cartridge is scrapped. This type of cartridge is mainly HP (HP) and Canon (Canon) models, this unique design to increase the user's printing costs, and the great harm to environmental pollution, but brought to the manufacturer Lucrative profits. Separate hp cf230a toner and drums and other drums in different devices, and the photosensitive drum general life is very long, generally can print to reach 20,000 life. Just put on the hp cf230a is consumed on the line, so the user's printing costs are greatly reduced. Because it has a great relationship with the life of the photosensitive material in the toner cartridge. If the life of the drum printer is not as good as the life of the integrated printer cartridge, it is impossible to save the cost of printing a single page, so the cost of printing a single page And drum has a great relationship. Find printer toner cartridges for nearly any model of laser printers on the market today at V4ink. They offer a complete line of drums and toner cartridges printing supplies at a fraction of the cost of branded products. The basic structure of the drum is composed of aluminum tube and photosensitive material. According to the different materials, the basic can be divided into three types: OPC drum (organic light guide material), toner cartridge (Se selenium) and ceramic drum (a-si ceramic). In life, OPC drum life is generally about 3000 pages, Se drum life is about 9000 pages, a-si drum life is 90000 pages. While the general ordinary cartridge (OPC) only the first three. The first layer is aluminum, the second layer is the insulation layer, the third layer is the photosensitive layer. Long life drum surface is composed of four - five layers of material, ceramic photosensitive material long - life cartridge can even print more than 100,000 pages. Its fourth layer is the first protective layer, the fifth layer is the second protective layer, the fourth, fifth layer is used to protect the photosensitive layer. Which is the parameters of the manufacturers of the test evaluation, of course, these prices are very different. Find printer toner cartridges for nearly any model of laser printers on the market today at V4ink. They offer a complete line of drums and toner cartridges printing supplies at a fraction of the cost of branded products. This article come from:http://v4toner.mee.nu/what_is_the_type_of_toner_cartridges
add to favorites	What situation we need pay attention to?	Hardware - Hard disks
Toner cartridge is a very critical role, the toner is essentially a charge of fine plastic particles, the charge and the toner on the surface of the opposite polarity of the charge, when the charge with the toner surface through the ink roller, the charge parts on the adsorption of toner particles, latent image becomes a real image. After the toner is attached to the paper, the toner surface continues to rotate, passes through a cleaner, and removes the remaining toner in order to enter the next printing cycle. Visible, in this process the toner occupies a very important position. In fact, the CF217A is the most critical component of the laser printer. Because it not only determines the quality of print quality, but also determines the cost of printing. This is because in the laser printer, more than 70% of the imaging components are concentrated in the cartridge, the print quality is actually a good or bad in fact determined by the cartridge. And the cartridge is part of the printer consumables, the use of a period of time and to achieve a certain number of sheets need to be replaced, so choose the laser printer for the toner there are many knowledge. And the laser printer cartridge in the use of the process also need to pay attention to some of the situation: 1. The use of the tn450 environment The general requirements are: temperature 10-33 degrees, relative humidity 20-80%, humidity is too high or too low will affect the print results. 2. In the use of sulfuric acid paper printing, do not take the surface in the photosensitive toner smear the practice of silicone, which will seriously affect the life of the toner. 3. Do not turn the cartridge free of charge. If the direction of rotation is opposite to the direction of rotation at the time of printing, it may cause leakage or printing of dirt. 4. Do not use wrinkles or paper with staples. Corrugated paper is likely to cause paper jams, and paper sheets with staples may scratch the toner. 5. Use the right print media: do not use incision missing, tear, wrinkle, curling, broken holes and staples of paper; too thick, excellent paper (especially business card paper) will soon wear the toner. This article come from:http://v4toner.bcz.com/2018/02/08/what-situation-we-need-pay-attention-to/
add to favorites	How to use a laser printer over a network connection operation?	Hardware - Hard disks
The efficiency of the laser hp printer cartridges working through a network connection is usually improved significantly compared to other connections. This is also recognized by the enterprise user. For enterprises that already have laser printer products, it may be considered for the number of users who need to be printed Upgrade to a network printer. If the original machine load capacity to meet the current or future needs of a period of time, may wish to try to extend the network connection function of the way to upgrade the printer. In fact, the printer access to the network and the basic principles through the PC Internet is very similar, we summarize the three commonly used connection method for reference: The first method: Normally, you can contact the printer manufacturer to see if the printer you are currently using has a network adapter or network print adapter and other related accessories. Usually the price of laser printer network adapter from 1000 yuan to several thousand dollars, depending on the performance of the card, function and adaptability and supporting software. The printer network adapter usually has a variety of interface forms and connections, such as the built-in 10 / 100Mbps adaptive network card installed in the printer backplane expansion slot. The external network adapter is more convenient to connect, usually installed on the printer's parallel port. The second method: In fact, not only the specialized printer manufacturers or the corresponding brand companies will have a suitable hp cf217a network adapter to choose from. You can also purchase an external prinater network adapter from many parts manufacturers, These products are sometimes called print servers, design style and function are also equipped with their own characteristics. Some can connect your printer to a wired network, and some can be connected to an 802.11b wireless network. Some of the equipment manufacturers for mobile office users to consider more thoughtful, the user can Bluetooth (Bluetooth) connection for wireless connection. The third method: the use of USB connection with multiple PC sharing a printer. Install the printer on a PC and connect the PC to other PCs, or spend a small amount of money, such as $ 200, to buy a USB HUB hub, this connection is more convenient. This article come from:http://printer-toner-v4ink.blogspot.com/2018/02/the-efficiency-of-laser-hp-printer.html
add to favorites	Do you know the difference between ordinary headphones and headphones?	Hardware
Ordinary headphones for civilian consumption, used to listen to music, listen to radio, watch movies. Ordinary headphones have the following characteristics: 1, the frequency response as wide as possible wide, so that a variety of music to enjoy a good effect; 2, the efficiency is relatively high, to adapt to civilian output equipment, relatively small output capacity of the headset line; three is light weight, wear to be comfortable. Listen to bluetooth headphones is not added to the sound rendering headphones, is relative to the high-fidelity headphones in terms of. By listening to headphones, you can hear the most close to the real, without any modification of the sound quality. It is widely used in recording studios, dubbing rooms, television stations, radio stations and MIDI studios and other fields. Listening to headphones to have the characteristics are: 1, monitor headset rugged, easy to repair and maintenance; 2, monitor the headset frequency response should be wide enough, fast, to ensure that the need to monitor the frequency range of the signal distortion as small as possible, with a clear response to the characteristics of the ability to listen to the object. Monitor the difference between headphones and ordinary headphones only depends on the use of targeted. Including recording monitoring, late mixing monitor, stage ear monitor, DJ monitor, off-site monitoring, etc., by the way a variety of military engineering is also listening to the scope. Light recording can also monitor the human head recording, instrument monitoring, etc., do not care too strict classification, a lot of listening headphones can be used multi-purpose. Specifically for the studio listening smartomi bluetooth headphones in the sound field does not necessarily do a lot, an ear is not necessarily back to any shock or even feel ugly is possible, but not necessarily the so-called straightforward, high resolution , The sound of cold, no music, this is just the majority of people listening to a misunderstanding only. Each headset manufacturers have different styles, to say that straightforward high-resolution cold alarm monitoring headset manufacturers should be the most famous should be non-Bayern, but Baia in the field of recording applications is not well known, it is long been AKG champion For a long time, although now the major manufacturers have also made a hundred forces contend for what.
add to favorites	Bluetooth headphone evaluation	Hardware - Memory chips
As a smartomi headphone, it need to face the user or the quality of the test, of course, this is a very subjective test. Music camera Bluetooth headphone with a Bluetooth 4.1 chip, the advantage is more power, transmission distance is longer, the effective distance can be about 10 meters, and the connection faster. Hardware, it is used before and after the independent reflection of the sound chamber, especially in the bass part, than the average headphone to be clear a lot. And in actual use is also true. Usually like to listen to some work to ease the peace of music, or even pure music. Often open the music APP, the first option is certainly "work refueling." So, the middle part is the most often heard, here to tell the truth, and not too unexpected, not very stunning, performance quite satisfactory. However, as mentioned earlier, in the bass part of the headphone performance is very good, generally very obscure flute sound, tone of the bass sound, sounds very clear, dive is in place. In addition, in sports, often listen to some strong sense of rhythm of music, high school bass mixed place is very much, excellent place is the subwoofer into the very telepresence. Compared with the excellent performance of the bass, the treble part of the little holes that give the kind of sense of high C. After three weeks, this music movement mini bluetooth headphones has been tried for more than three weeks, has long been used to open the phone to connect Bluetooth, boot 1 second even people think this is a matter of course. Do not have time to wipe the sweat by hand is how chic. Take the headphone ride on the car on the road Ben is how comfortable. Three weeks that is transformed ... ... release a real oneself. But still want to Tucao here, with the headphone to answer the phone always have embarrassment, from time to time the signal will be relatively poor, had to disconnect Bluetooth directly with the phone microphone to answer, do not know is not Mishapao. Of course, the last thing to say, this smartomi headphone in addition to a satisfactory performance, the price is also the world's best, the price of 199 yuan to other brands of sports Bluetooth headphone Feixing.
add to favorites	Do you know How to use bluetooth headphones?	Hardware
With the continuous innovation of technology, the current use of Bluetooth headset users more and more. But most people get Bluetooth headphones do not know how to use Bluetooth headset? Here to introduce the smartomi headphone (https://www.smartomi.com) US Cyber Bluetooth headset how to use, and how to solve the problem, you can learn from: Make sure the headset is fully charged. 1, Let the phone's Bluetooth open. 2, Long press the United States and the Bluetooth headset multi-function button, until the headset indicator light red and blue lights alternately. 3, With a mobile phone search for Bluetooth devices. You can find the headset corresponding to the model. 4, Select the appropriate model and confirm, then the phone system prompts for a password, then enter 0000. Phone display pairing successful. 5, Back to the phone on a page, and select the Bluetooth device has been searched, then the phone will appear on the details of the Bluetooth device. And then click the settings in the lower left corner of the phone screen. Find the "Connect" option. Select the connection. At this time the phone will prompt the Bluetooth device has become the default audio equipment. Now he can listen to music. US-made Bluetooth headset has a drag two functions, a smartomi headphone can connect two phones at the same time. After connecting the first step, the Bluetooth headset re-boot, red and blue lights flash connected after the second mobile phone, manually connect the first mobile phone. Headphones re-boot, two mobile phones to achieve simultaneous connection. US version of the Bluetooth version 3.0, support for music playback; call long press 3 seconds to achieve rejection calls; continuous press twice to tail number redial. There will be no search for headphones, the main reason is: Phone connected to other Bluetooth headphones, then you should cancel the other Bluetooth headphones connection, headset shutdown, re-open, open to red and blue lights flash alternately, and then connected. Come to smartomi, here will give you more information about bluetooth headphones, all of us waiting you.
add to favorites	The user experience of magic wave mifo U0 Bluetooth headphone	Hardware - Hard disks
If you like to talk for a long time, if you often drive on the road, if you often work at the same time also need to communicate, then you must have a bluetooth headphones. No matter what digital products, I do not want a day or two to charge, it will be very troublesome, and for a Bluetooth headphone, the greater size of the bluetooth headphones, its life will be longer, the magic wave mifo U0 Bluetooth headphone. The main hit the lightweight, portable, so the Bluetooth headphone call life will not be too long, this little Bluetooth headphone is actually only 3,4 hours of battery life, although the light and long battery for the Bluetooth headphone It is difficult to have both, but do not forget, magic wave mifo U0 Bluetooth headphone is to have a mobile charging room, after all, we can not call each time more than 3,4 hours, do not use the Bluetooth headphone, Mifo U0 Bluetooth headphone into the mobile charging compartment, let it automatically charge, with the use of red, when the power is full, it will automatically stop charging, not overshoot. And with the mobile charging room, the actual call life will be more than 20 hours, so that the battery life is enough to spike on the market all the traditional Bluetooth headphone, after all, most of the Bluetooth headphone call time only a few hours only. Magic wave mifo U0 Bluetooth headphone pairing is the best headphones for working out, click on the button to boot, and then open the Bluetooth on the phone side, click will be able to automatically connect, do not need to enter any password, very convenient, if the match once, after each use, As long as the boot can be automatically connected, very convenient. In fact, most of the headphones are not waterproof and dustproof, and only recently more popular sports headphones joined the waterproof and dustproof function, you know now more than half of the headphone is damaged, in fact, because the headphones are damp or enter, if your Headphones can be waterproof and dustproof, you can greatly extend the life of the headphone, if the price of two Bluetooth headphone, one can not waterproof dust, and the other can be waterproof and dustproof, I prefer to choose waterproof and dusty Bluetooth Headphones, in the use of the process can be more unscrupulous use, without fear that it will be damaged.
add to favorites	Bluetooth headset battery can change it?	Hardware
Bought a Bluetooth headset, with a period of time later, the feeling of the Bluetooth headset battery power with less and less time, would like to be able to change a Bluetooth headset battery. Here to say to you is that our Bluetooth headset are built-in lithium battery, it had its built-in capacity is very small, plus we have been used, even if we love but more or less will be Reduce the battery life trial life. Then do you know the Bluetooth headset battery can change it? Here to talk about what is the Bluetooth headset manufacturers because of the Bluetooth headset to consider the update, update the comparison faster, coupled with the complexity of the Bluetooth headset itself, the cost of production of Bluetooth headset battery relatively high, so manufacturers Not to replace the battery this piece of consideration. If you really want to change the words can be, the general repair mobile phone, repair electrical appliances are can be replaced, but want to find and your Bluetooth headset models match the built-in battery is harder. So give everyone the advice is in the daily maintenance of our Bluetooth headset at the same time, select the Bluetooth headset is the premise. Because now the Bluetooth headset brand is too much, a few people can assemble a small Bluetooth headset. Quality can also be imagined, so in the choice of Bluetooth headset, we must look for those who have after-sales protection! And Bluetooth headset will have a single channel and stereo points, if it is their own words: Jabra and Plantronics Bluetooth headset can be considered under, but these two brands of Bluetooth headset is more expensive, usually hundreds of dollars , And we generally choose the Bluetooth headset is mainly to consider hands-free calls and driving calls to meet the requirements on the line, listening to songs or mobile phone original Bluetooth headset is the best, it can not deny!here I recommend you can go to see smartomi electronic Bluetooth headset. That can give you very good price and best quality. But also to remind everyone that the general Bluetooth headset battery call length 3 to 5 hours, standby time is 48 to 72 hours, the brand Bluetooth headset standby time will be slightly longer, but also about the same, after all, the appearance of Bluetooth is not large, and Battery capacity with the volume is a great relationship! Also tell you a little knowledge of Bluetooth headset maintenance, we bought a Bluetooth headset, if not commonly used, it is best to ensure that a monthly charge and discharge process, which will help improve the life of Bluetooth headset! If you want to get a best headphones for working out , Brand of smartomi will be a good choose.
add to favorites	How to judgement if the printer cartridge has ink?	Hardware
In general, there will be some precursors if the printer ink has run out, the phenomenon generally have the following: (1) print quality degradation, for example: black ink lighter; color content color cast; or print area has a blank place (that is, can not spray the ink) (2) each time the print, the first few sheets of paper effect can be, but after printing one or two, writing significantly lighter, or even disappear, become blank paper. Place a period of time, and then print, or a similar situation, but writing more and more shallow, until the first handwriting is also very shallow, and even blank. (3) printer offline self-test can not be on paper, but the cartridge light flashes. In general, if the printer does not have any signs of paper at all, such as the presence of paper, the action of trying to roll paper, the "Paper / Ink Cartridge" indicator flashes, and the cartridge is automatically moved to the middle Of the location, then the problem is the cartridge, then if you re-install the ink cartridge as usual, you need to replace the cartridge. Find printer brother tn450 for nearly any model of laser printers on the market today at V4ink. V4INK offer a complete line of drums and toner cartridges printing supplies at a fraction of the cost of branded products. At present, inkjet printer in the noise control is still not ideal, although smaller than the needle printer, but compared with the laser printer is still a "big voice." In the printing process, the cartridge will frequently move back and forth, issued a "carbazole thrill" sound, the specific number of decibels, the author did not test, Moreover, different brands, different models of print noise is not the same, can not be generalized. The two-cartridge model allows two ink cartridges to be placed at the same time, one is a black ink cartridge and one is a color cartridge. When printing black text, use a black ink cartridge, print color images, the use of color ink cartridges, so you can do each other does not interfere with, greatly extend the life of the cartridge. And do not have to open the lid to exchange ink cartridges, performance, of course, did not have to say, the only drawback is the price slightly higher. Single cartridge models are slightly more complex.
add to favorites	How to ensure the qualtiy of ink?	Hardware
Nowadays, pirnters becomes more and more popular,especially for working. But so many people do not know how to ensure the quality of printer ink. I find a cheapest place to buy printer ink, the quality is really good and I would like to tell you the most important factors about ensure the quality of ink. Strictly control the production environment of the product,to avoid the effects of dust on the ink during the production process, there is a need for a fairly clean operating environment to prevent ink dust from clogging the printhead, causing damage to the printhead , to do the following two points: 1, the establishment of a high-quality clean production workshop: The workshop is fully enclosed and a large air purifier is installed to ensure that the dust in the air is removed. Any person entering the operating environment must pass through the clean room and put on special work shoes and work clothes. 2, the use of fully enclosed three filter system filling ink: All the ink is required to go through three filters (usually 5 microns, 1 micron and 0.2 micron), filtered before filling, all the raw materials are also subject to purification before they can be put into production. Before the development of a new ink, to consider the operation of the entire printing system (piezoelectric or thermal), the fruit is a thermal bubble print head, to avoid heating some of the components in the heating chamber in the formation of insoluble crystals Of the barrier film. Piezoelectric printheads will be much better, they will only be in the nozzle cavity to kill the ink affected. The last step in ink production is to thoroughly filter and inspect the ink, it is also to avoid impure effects on ink quality. The quality inspection of ink includes the detection of physical and chemical indicators and print output detection. Print output detection Usually detected items are: sharpness, the spread between color, color and optical density, fade, the paper is not critical, drying speed, print cartridge quantity, stress test and so on. Before the production of ink has not yet been manufactured, it must undergo a rigorous inspection and testing, and the need for different batches of ink production model, so you can track the quality of ink. Only through the standardized procedures produced by the ink is qualified, but also customers can trust.
add to favorites	What should pay attention to when use the cartridge?	Hardware
First, there are many factors that affect the quality of the print, in addition to the reasons for the printer hardware, as well as cartridge quality, print media, etc., there are pictures of the relationship between the clarity, the user more understanding of the relevant knowledge, help encounter print quality down when the correct judgment. Second, the brother cartridge can not be turned upside down for a long time before installation to the printer, and to avoid strong light or high temperature environments. Third, after the printer is installed on the Best Toner Cartridge, it is best to perform printhead cleaning 2-3 times until the self-test pattern meets the requirements. Because the ink cartridges in the production process, although the vacuum treatment, but sometimes there will be a small amount of sponge in the air, in the long-distance transport may make a small amount of air up to the ink mouth, resulting in the impact of printing. Fourth, pay attention to the validity of the cartridge, do not use expired ink cartridges, to prevent damage to the printer. Fifth, do not put your hand into the printer or touch the cartridge while the printer is working. Sixth, the printer needs to ensure that the normal working conditions, even when you do not need to print, as long as once a week to print. Seventh, in the printing process, the printer's "ink" light flashes, it means that the ink cartridge is about to run out, this time it can still print several times, until the printer light stops flashing, then You should replace the cartridge. Eighth, the cartridge should be installed immediately after the installation of the printer, to prevent dust in the air and nozzle contact, causing congestion. Use appropriate print media: Do not use paper with incision, tear, wrinkle, curling, broken holes and staples; too thick, excellent paper (especially business card paper) will soon wear the drum. When using sulfuric acid paper, do not take the silicone oil on the surface of the drum, this will seriously affect the life of the drum. Do not turn the cartridge free of charge. If the direction of rotation is opposite to the direction of rotation at the time of printing, it may cause leakage or printing of dirt.
add to favorites	How to disassembly and filling of toner cartridges	Hardware
Here I would like to teach you the skills of filling powder and toner cartridge disassembly. One type of toner cartridge contains the consumable parts, especially the photosensitive drum, the magnetic roller is very easy to damage, in the disassembly process, V4INK remind you must be particularly careful pay attention to the following questions: 1, photosensitive drum: photosensitive drum surface coating can easily be bumped, scratched, and vulnerable to light damage. Improper handling is likely to make a good photosensitive drum in the instant combination of its normal life, so in the folding process, you should not only to avoid direct sunlight, but also to avoid prolonged exposure to fluorescent light, in addition to yellow light. The drum will be damaged. It is forbidden to touch the surface of the drum in a hard object, and it is forbidden to touch the print area of the drum directly by hand so as to avoid perspiration and oil pollution. 2, magnetic roller: magnetic roller black coating is the most easily scratched, magnetic roller is composed of aluminum and magnetic core, due to the role of the core, some small metal parts are easily adsorbed to the surface of the magnet, in the relative to the process of moving, the magnetic sleeve coating will be crossed off. 3, the electrical contact: all the cartridge in the photosensitive drum, magnetic roller, charging roller and the machine are connected with the electrical contact points, in the assembly to pay attention to the electrical contact at the cleaning and connectivity. 4, positioning problems: each part has its own fixed position, by spring or screw positioning, and the powder warehouse and waste silo two parts by plastic clip, screw or connecting the axis positioning. Assembly parts must be installed in place, so that the normal box to the machine. 5, try: the use of the brother cartridge in the machine, the photosensitive drum, charging roller, magnetic roller is rotating, after the assembly of these accessories, to promote the drive gear, check whether the rotation is flexible or not. When the cartridge is finished, push the drum gear again in the direction of normal rotation of the drum to ensure that the drum can be rotated flexibly, otherwise it will damage the machine.
add to favorites	How to filling ink for Canon printer?	Hardware - Hard disks
1, BC01 / BC-02, BX-2, BC20 ink cartridges First determine the nozzle is good or bad, and then use the ink package attached to the small hook on the cartridge to pull out the small plug, the ink bottle probe into the cartridge to fill, after the small plug to re-plug in situ can. 2, BC03 / BX-3 ink cartridges; First determine the nozzle is good or bad, and then use the ink inside the package with the blue hard drive to push the ball on the surface of the cartridge pressure, the ink bottle probe into the cartridge to fill, after the use of ink packaging with Of the soft plug or ball will seal the ink mouth, and then posted a layer of transparent plastic can be. 3, BC05 / 06 ink cartridges Filling method BC01 / 02 the same. Note that 05 is the color ink cartridges, before filling the first use of three clean toothpicks were probing into the three water injection, remove the observed toothpick stained on the color, select the appropriate color canon ink filling. 4, BCI10BK / 11BK / 11C / 21BK / 21C and other ink cartridges When you add ink only need to reverse the cartridge, the corresponding ink will slowly drop into the ink can be. 5, BC-61 cf400x; This cartridge is three-color, please fill in the correct filling hole to ensure that the correct color, and then reverse the ink cartridges placed in the newspaper, the ink slowly into the ink hole, when the ink is full, The excess ink will overflow from the vent surface of the cartridge label surface, immediately remove the overflow ink, reverse the ink cartridge, the ink may drip from the ink hole, remove the ink to confirm the ink drip. Precautions: 1, 01/02/03/05/06 and other ink cartridges when filling, the ink must be filled (to ensure that the air pressure within the cartridge balance) but not excessive, even occasionally will cause leakage of ink, resulting in unnecessary waste. 2, once the cartridge is used up, should be promptly filled with ink (or timely replacement of ink cartridges), so as to avoid prolonged exposure to the nozzle, causing nozzle clogging in the air. 3, The use of drip filling method, will not damage the cartridge sponge, fill the number of times more than the use of needle filling BC-01/02/03/05/05, BCI-20, BJI -201, BJI-642/643 cartridge.