| Category | Economy cars |
|
|||
| Created | 2019-05-13 | ||||
| Owner | juniperqq | ||||
| Title | Color Steel Coil Production Process | ||||
| Description | After China high quality prepainted color galvanized coil coating process is completed, the tension is transferred to the outlet section after being supplied by the tensioner. The storage unit is empty during the normal operation of the production line. When the outlet section stops and discharges, the storage unit continues to be coated from the roller. The coils that run through the process section are stored again. After the next color steel coil is started to be taken up, the exit section speeds up and the loop is pulled out. The outlet storage unit passes through two deflection rollers, and the tensioner maintains the proper tension in the storage unit, and provides the post tension for the winding. The coil plate reaches the shearing machine through the pallet, the idler and the pallet pin feeder. At the place where the coiled plate is cut, the steering roller enters the winder to wind up. Between the winder and the pinch machine is a photoelectric edge control device, the sensor can measure the edge of the prepainted color galvanized coil, that is, send a signal to the winder to make the chute follow, to ensure the edge winding of the color steel coil. When the winder reaches the required diameter, the winder stops, cuts the coil, raises the trolley, holds the coil, and the main shaft of the winder is shrunk. The feeding trolley carries out the color steel coil for bundling. And weighing. The head of the next color steel coil is fed into the winder, and the winder is accelerated until China prepainted color galvanized coil in the stocker is finished. This way the outlet section runs at the same speed as the overall production line. | ||||
| Consumption | |||||
| Broken | No | ||||
| Price | |||||
| Promotion level | None | ||||
|
|
|||||
Please register or log in.
