Home » Cars » Fire prevention measures for installing Low-cost Walking tractor Mounted Multi-function Reaper
| Category | Cars |
|
|||
| Created | 2019-04-10 | ||||
| Owner | yanghuim | ||||
| Title | Fire prevention measures for installing Low-cost Walking tractor Mounted Multi-function Reaper | ||||
| Description | The multi-purpose harvester is new agricultural machinery and equipment in recent years. Its appearance has made farmers' friends say goodbye to the traditional manual harvesting methods for thousands of years, greatly reducing the labor intensity of farmers' friends. Mechanical equipment should be safe first in the operation process, so the operator must fully grasp the knowledge of safe operation of the multi-function harvester. When the multi-purpose harvester is used for harvesting, it is hot or the weather is dry. If it is slightly negligent, it is prone to fire and causes serious safety accidents. In order to prevent the occurrence of a harvester fire accident, the following points should be noted when installing a Low-cost Walking tractor Mounted Multi-function Reaper: 1. Harvesters should be carefully inspected and maintained before putting into harvesting operations. According to relevant regulations, “Five Nets” (oil, water, gas, machinery, tools), “four no leaks” (oil, water, gas, electricity), "Six closed" (diesel tank port, gasoline tank port, oil filler port, carburetor, magneto, oil inspection port), "one intact" (technical state), while keeping the engine and fuel tank clean, no gasoline Wipe grease. 2. Always check the electrical equipment to see if the connection of the circuit leads is loose or not. Wire joints should be firmly connected with bolts with spring washers; circuit harnesses and wires should be covered with plastic pipes and sealed to prevent water from entering the oil; there should be no oil near the wires, and the battery of the corn harvester should have good protection equipment to prevent metal. A short-circuit arc occurs when the object falls. 3. The electrical circuit is away from the heat source. Use the clip to fix the wire passing through the moving part. The middle span of the wire should not be too long or too short to prevent the wire from being worn, scratched and exposed due to rotation or vibration. 4. Always check the ignition time of the gasoline engine for starting to prevent carburetor tempering when working in the field; it is best to install a qualified Mars collector for the engine host. Do the above fire prevention measures to use the multi-purpose harvester equipment safely. | ||||
| Consumption | l/mile | ||||
| Broken | No | ||||
| Price | |||||
| Promotion level | None | ||||
|
|
|||||
