| Category | Cars |
|
|||
| Created | 2019-04-09 | ||||
| Owner | yanghuim | ||||
| Title | Lubrication and maintenance of Walking Tractor Single-row Corn harvester wholesale | ||||
| Description | With the continuous development of China's agriculture, the corn planting area is also growing. Every season of corn harvesting, corn harvesters have become a good helper for farmers to harvest corn. The corn harvester has now become a relatively comprehensive mechanical equipment in agricultural equipment. The equipment can perform corn picking, peeling, threshing and stalk treatment at the same time, but we must do the lubrication and maintenance work of the corn harvester. Regarding the main precautions for the lubrication and maintenance of corn harvesters, how much do you know about it? Today, Walking Tractor Single-row Corn harvester wholesale manufacturers to give you a detailed understanding: 1. The equipment used for oil should be clean. Wipe grease and dust from grease nipples, filler ports, and lubrication parts before lubrication. 2. Lubrication means that the injection point should be filled with butter once per shift. When filling the butter with a grease gun, it must be added. When the filling is not entered, the lubrication part can be rotated and added until it is full. 3. Exposed rotating parts such as chain and exposed transmission gears should be lubricated and maintained every day. When lubricating, stop, remove the sludge on the chain and evenly brush the lubricating oil. In addition, the sleeve roller chain should be removed every 3 to 5 days, cleaned once in gasoline with a brush, and then immersed in hot oil for 15 minutes. 4. Always check the working temperature of the friction parts such as bushings and bearings. If the oil seal leaks and the working temperature is too high, it should be repaired and lubricated immediately. If it can not be repaired immediately, the lubrication interval should be shortened. For each lubrication part, detachable bearings, bushings, sliders, etc. should be combined with maintenance, cleaned with oil, and filled with lubricating oil after assembly. For oil-containing bearings, remove them after the end of each year and soak them in the oil for 2 hours. 5. After the trial operation of the Walking Tractor Single-row Corn harvester, or after a long period of operation, the gearbox gear oil and the engine oil pan oil should be replaced or filtered before use. Generally, it is checked once a week. It is found that the corn harvesting machinery oil leakage should be searched for reasons to eliminate the fault. When the oil level is insufficient, first check whether the residual oil is emulsified and deteriorated. If it has deteriorated, it should be completely replaced. If it has not deteriorated, add the same lubricating oil as the original model. To the required oil level. 6. After the end, each oil filling point should be filled with oil. Unpainted surfaces such as open drive gears and knives should be oiled and rustproof. The drive chain of each part should be removed, and then cleaned and immersed in the stock by oil. | ||||
| Consumption | l/mile | ||||
| Broken | No | ||||
| Price | |||||
| Promotion level | None | ||||
|
|
|||||
Please register or log in.

