Home » Cars » Factory supply and widely used Agricultural walking tractor driven mini corn harvester installation and commissioning?
| Category | Cars |
|
|||
| Created | 2019-02-21 | ||||
| Owner | yanghuim | ||||
| Title | Factory supply and widely used Agricultural walking tractor driven mini corn harvester installation and commissioning? | ||||
| Description | Factory supply and widely used Agricultural walking tractor driven mini corn harvester are an agricultural device that many agricultural users now use. Many users know that the equipment needs to be installed and commissioned before use. How? Install and debug it? Let me explain to you today. 1. Hang the corn harvester behind the walking tractor, open the rear cover of the walking tractor, and connect the harvester gear to the main gear of the walking tractor, and check for any card or collision. If there is, the gear should be removed in time. 2. At the start, raise the corn harvester to the excavation tool tip 5-8 cm from the ground and combine the power output of the tractor, idling for 1-2 minutes. If there is no abnormal noise, hang up the working gear and gradually relax the clutch lever. Adjust the height of the knife edge gradually into the soil, and then increase the throttle until normal cultivation. 3. Check the corn harvest rate of the corn harvester after work, check whether there is any broken and severe skin breakage. If the corn is broken, the harvesting speed should be reduced and the excavation depth should be deepened. 4. When working, it is forbidden to stand or sit on the machine, otherwise it may be entangled in the machine, causing serious personal injury or death. When the machine is in operation, it is forbidden to approach the rotating parts, otherwise the body may become entangled and cause personal injury. 5. When servicing the machine, the power of the tractor's power output shaft must be cut off to prevent personal injury. 6. When working, it is strictly forbidden to stand or sit on the machine to prevent accidents from falling into the machine. When the machine is running, it is strictly forbidden to approach the rotating parts! | ||||
| Consumption | l/mile | ||||
| Broken | No | ||||
| Price | |||||
| Promotion level | None | ||||
|
|
|||||
