| Category | Cars |
|
|||
| Created | 2018-11-15 | ||||
| Owner | yanghm | ||||
| Title | What about the operation of the free sample cutting disc? | ||||
| Description | Tfree sample cutting disc front operation problem: For daily use, many operators are always used to operate on the cutting piece. The reason for this direction is that the force can be used. In fact, the operation of the grinder should be specifically prohibited. According to the operating procedure, when grinding the workpiece with a grinder, the operator should stand on the side of the cutting wheel of the grinding wheel and do not operate it on the front side to avoid the failure of the grinding wheel to fly out or break up and hurt people. Forced operation of the free sample cutting disc: When the grinder is used, some operators, especially young operators, are trying to achieve fast grinding speed and excessive force. This is a very unsafe operation. Any grinding wheel cutting piece has a certain strength, which is likely to cause the resin grinding wheel cutting piece to break, and even fly out to hurt people, it is also a prohibited behavior. Free sample cutting disc joint operation problem: In actual daily operation, there are also such situations. Some people want to catch up with the production task and grab the working time. The two people share a single grinder and operate at the same time. This kind of serious illegal operation should be strictly prohibited. When a grinder is not enough, it can be solved by adding a grinder. It is absolutely not allowed to share a grinder at the same time. | ||||
| Consumption | l/mile | ||||
| Broken | No | ||||
| Price | |||||
| Promotion level | None | ||||
|
|
|||||
Please register or log in.
