Category | Hardware |
|
|||
Created | 2017-10-20 | ||||
Owner | adtozhou | ||||
Title | How to disassembly and filling of toner cartridges | ||||
Description | Here I would like to teach you the skills of filling powder and toner cartridge disassembly. One type of toner cartridge contains the consumable parts, especially the photosensitive drum, the magnetic roller is very easy to damage, in the disassembly process, V4INK remind you must be particularly careful pay attention to the following questions: 1, photosensitive drum: photosensitive drum surface coating can easily be bumped, scratched, and vulnerable to light damage. Improper handling is likely to make a good photosensitive drum in the instant combination of its normal life, so in the folding process, you should not only to avoid direct sunlight, but also to avoid prolonged exposure to fluorescent light, in addition to yellow light. The drum will be damaged. It is forbidden to touch the surface of the drum in a hard object, and it is forbidden to touch the print area of the drum directly by hand so as to avoid perspiration and oil pollution. 2, magnetic roller: magnetic roller black coating is the most easily scratched, magnetic roller is composed of aluminum and magnetic core, due to the role of the core, some small metal parts are easily adsorbed to the surface of the magnet, in the relative to the process of moving, the magnetic sleeve coating will be crossed off. 3, the electrical contact: all the cartridge in the photosensitive drum, magnetic roller, charging roller and the machine are connected with the electrical contact points, in the assembly to pay attention to the electrical contact at the cleaning and connectivity. 4, positioning problems: each part has its own fixed position, by spring or screw positioning, and the powder warehouse and waste silo two parts by plastic clip, screw or connecting the axis positioning. Assembly parts must be installed in place, so that the normal box to the machine. 5, try: the use of the brother cartridge in the machine, the photosensitive drum, charging roller, magnetic roller is rotating, after the assembly of these accessories, to promote the drive gear, check whether the rotation is flexible or not. When the cartridge is finished, push the drum gear again in the direction of normal rotation of the drum to ensure that the drum can be rotated flexibly, otherwise it will damage the machine. |
||||
Type | Pc | ||||
Price | |||||
Promotion level | None | ||||
|
Please register or log in.